AJAX Hub 2 Plus Jeweller Black - Control Panel with 200 Devices, Wi-Fi and Photo Verification

Up to 200 wireless Ajax devices, including up to 10 sirens or keypads with a built-in siren and up to 5 range extenders, with up to 200 users and 64 automation scenarios.

Over Ethernet, Wi-Fi and two SIM cards (2G/3G/LTE). The channels work in parallel and it switches between them instantly if one drops (up to 4 minutes between SIMs).

The built-in 3 Ah battery takes over. Ajax calculates up to 15 hours when the hub runs on a SIM card only. A 6 V or 12 to 24 V alternative power supply can also be fitted (sold separately).

Ajax MotionCam detectors take photos when an alarm is triggered, on demand, by scenario or on a schedule. The hub delivers them in about 9 seconds, so you or the monitoring company can see what happened.

Yes. It supports SIA (DC-09), SurGard (Contact ID) and ADEMCO 685, so it can report to a monitoring centre, including photo verification and panic button coordinates.

Hub 2 Plus adds Wi-Fi as a third connection and supports more: up to 200 devices, 200 users, 64 scenarios and 25 security groups. Hub 2 (4G) supports up to 100 devices, 50 users, 32 scenarios and 9 groups, and connects by Ethernet and SIM.

It takes two micro-SIM cards and supports the LTE bands listed in the specifications. We check the SIM and signal at your property before installing.

No. The hub is for indoor installation only (IP20). Detectors and sirens rated for outdoor use go outside and talk to the hub by radio.

The hub, a SmartBracket mounting panel, a power cable, an Ethernet cable, an installation kit, a SIM card (depends on the sales region) and a quick start guide.

In the Downloads section on this page. The documents are published by Ajax Systems and open on the Ajax website.

Yes. We supply, install and program Ajax alarm systems across Melbourne and the Mornington Peninsula, and can connect them to a monitoring company. Request a quote and we will plan the detectors, sirens and keypads with you.