Akuvox A08 Access Control Terminal
The Akuvox A08 is a slim access control terminal that combines a door controller and card reader in one device, with five credential options: PIN code, QR code scanning, Bluetooth wave-to-unlock, NFC mobile access, and RFID cards. Its aluminum alloy and toughened glass housing is rated IP65 and IK09, and it supports both Wiegand and OSDP protocols for integration with third-party access control panels.
Key Specifications
Core Features
Technical Specifications
| Category | Specification |
|---|---|
| Model | A08S |
| Colour | Black |
| Front Panel | Toughened glass |
| Frame | Aluminum alloy |
| RFID Card Reader | 13.56MHz & 125kHz |
| Access Methods | PIN code, QR code, Bluetooth, NFC, RFID card |
| User / Card Capacity | 20,000 |
| Event Log Capacity | 100,000 |
| Relay Out | 1 |
| Inputs | 2 |
| Wiegand | Supported |
| OSDP | Supported |
| RS485 | Supported |
| Speaker | 8Ω / 0.5W |
| Tamper-Proof Alarm | Supported |
| Ethernet Port | RJ45, 10/100Mbps adaptive |
| Networking Protocols | IPv4, HTTP, HTTPS, FTP, DNS, NTP, TCP, UDP, ICMP, DHCP, ARP |
| Power Supply | 802.3af Power-over-Ethernet, or 12V DC connector (600mA) |
| Ingress Protection | IP65 |
| Impact Protection | IK09 |
| Installation | Flush-mounted or wall-mounted |
| Dimensions | 50 x 140 x 26.7mm |
| Working Humidity | 10~90%, non-condensing |
| Working Temperature | -20°C to +55°C |
| Storage Temperature | -30°C to +70°C |
| Platform Compatibility | Akuvox Cloud, Akuvox SDMC, ACMS |
Similar products
Questions and answers
No questions about this product yet. Ask ours first, and a licensed installer will answer.
Get a quote for this product
Prefer the full form?
Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.
The full quote form opens as you scroll here.
Frequently Asked Questions
The A08 adds QR code and Bluetooth wave-to-unlock credentials on top of RFID, NFC and PIN, is rated to a higher IK09 impact standard, and supports OSDP and RS485 in addition to Wiegand, for broader integration with third-party access control systems.
Five: a PIN code, QR code scanning, Bluetooth wave-to-unlock, NFC-enabled mobile phones, and 13.56MHz/125kHz RFID cards.
Yes. Its toughened glass and aluminum alloy housing is rated IP65 for water and dust ingress and IK09 for impact resistance, with a working temperature range of -20°C to +55°C.
It supports 802.3af Power-over-Ethernet for single-cable installation, or a 12V DC connector (600mA) where a PoE network isn't being used at that door.
Yes. It supports Wiegand, OSDP and RS485, so it can be switched to reader mode and connected to a wide range of third-party access control panels, in addition to its own built-in relay output and inputs.
Ready to Install the Akuvox A08?
Contact Sipko Security to request a quote or discuss integrating the A08 access control terminal into your building's doors, gates, or lift lobby access system. We provide complete design, installation, and ongoing support for Akuvox access control across Melbourne and regional Victoria.
