Akuvox R20A On-Wall Rain Cover
The Akuvox R20A On-Wall Rain Cover secures directly to the wall together with the R20A’s wall-mounting bracket, giving a surface-mounted R20A added weather protection on exposed exterior entrances. Akuvox specifies different fixings depending on whether there’s an embedded box behind the wall.
Price on Request
Mounting Accessory · For Akuvox R20A On-Wall Installs
Access Control
No Wall Cavity Required
Mounts directly onto the wall surface, suited to retrofits where cutting into the wall isn’t practical.
Two Fixing Configurations
Uses four ST4x20 screws without an embedded box, or two ST4x20 plus two M4x30 screws when securing over an embedded box.
Melbourne installations: Sipko Security supplies and fits Akuvox R20A on-wall rain covers for exposed outdoor entrances across Melbourne and regional Victoria. Get a free quote today.
Core Features
Detailed Breakdown
Without an Embedded Box: Four ST4x20 crosshead screws secure the rain cover and wall-mounting bracket to the wall together, in sequence.
With an Embedded Box: Two ST4x20 crosshead screws and two M4x30 crosshead screws secure the rain cover and wall-mounting bracket where an embedded box is already in the wall.
Slide-and-Lock Device Fit: The R20A’s wall-mounting screws slide into grooves on the bracket, then two M3x6 hex socket screws lock the device in place with an Allen wrench.
For On-Wall Installations: Designed to work with the R20A’s surface wall-mounting bracket, following Akuvox’s official rain cover installation guide.
Complete Technical Specifications
Data Table
| Specification | Details |
|---|---|
| Compatibility | Akuvox R20A door intercom (on-wall installations) |
| Fixing (No Embedded Box) | 4x ST4x20 crosshead screws |
| Fixing (With Embedded Box) | 2x ST4x20 crosshead screws, 2x M4x30 crosshead screws |
| Device Fixing Screws | 2x M3x6 hex socket screws |
Frequently Asked Questions
Q&A
The In-Wall Rain Cover fits onto the flush-mounting bracket for a recessed installation. This On-Wall Rain Cover mounts directly on the surface of the wall alongside the standard wall-mounting bracket instead.
If there’s no embedded box behind the wall, four ST4x20 screws secure the rain cover and bracket directly to the wall. If an embedded box is already there, two ST4x20 screws and two M4x30 screws are used instead.
Yes, when properly installed. Surface mounting is a matter of installation preference and site constraints rather than security, and both options are commonly used across Sipko Security’s Akuvox installations.
Need Extra Weather Protection for Your R20A?
Contact Sipko Security to add an on-wall rain cover to your Akuvox R20A surface-mount installation on exposed outdoor entrances. We provide complete design, installation, and ongoing support for Akuvox access control across Melbourne and regional Victoria.