Akuvox R20A On-Wall Box
The Akuvox R20A On-Wall Box is the standard wall-mounting bracket kit for a surface-mounted R20A, supporting installation with an existing 86x86mm or 2×3 inch electrical junction box, or directly onto a bare wall with plastic wall anchors.
Price on Request
Mounting Accessory · For Akuvox R20A
Access Control
Two Junction Box Sizes Supported
Fits directly onto an existing 86x86mm or 2×3 inch electrical junction box using two M4x30 screws.
Works Without a Junction Box
Can also mount directly to a bare wall using four ST4x20 screws into plastic wall anchors, drilled with a 6mm bit to 25mm depth.
Melbourne installations: Sipko Security supplies and installs Akuvox R20A door intercoms on surface-mounted brackets across Melbourne and regional Victoria. Get a free quote today.
Technical Specifications
Product Details
Mounting Type
Surface / on-wall mount
Junction Box Support
86x86mm or 2×3 inch
Compatibility
Akuvox R20A
Core Features
Detailed Breakdown
86x86mm Junction Box Fitting: Mounts to the embedded box with two M4x30 crosshead screws, or fixes both the bracket and box together with two ST4x20 and two M4x30 screws where a bare mounting hole is used instead.
2×3 Inch Junction Box Fitting: Mounts to the 2×3 inch box with two M4x30 crosshead screws.
No Junction Box Required: Four ST4x20 crosshead screws into plastic wall anchors secure the bracket directly to a bare wall, drilled with a 6mm bit to 25mm depth.
Rope-Assisted Fitting: The R20A hangs from the bracket on a supplied rope during wiring, then slides into a groove and locks with two M3x6 hex socket screws.
Complete Technical Specifications
Data Table
| Specification | Details |
|---|---|
| Compatibility | Akuvox R20A door intercom |
| Mounting Type | Surface / on-wall mount |
| Junction Box Support | 86x86mm or 2×3 inch |
| Junction Box Fixing Screws | 2x M4x30 crosshead screws |
| Bare Wall Fixing Screws | 4x ST4x20 crosshead screws, 4x plastic wall anchors |
| Anchor Drill Spec | 6mm diameter bit, 25mm depth |
| Device Fixing Screws | 2x M3x6 hex socket screws |
| Wiring Cover Screws | 4x M2.5×6 crosshead screws |
Frequently Asked Questions
Q&A
No. The bracket supports fitting onto an existing 86x86mm or 2×3 inch junction box, or mounting directly to a bare wall with plastic wall anchors if no junction box is present.
This is the standard wall-mounting bracket without the added rain cover. If your entrance needs extra weather protection, see the R20A On-Wall Rain Cover instead.
Yes, Akuvox also offers an in-wall (flush-mount) box for the R20A. Ask Sipko Security which mounting option suits your installation.
Planning a Surface-Mounted R20A Installation?
Contact Sipko Security to confirm the right mounting bracket for your Akuvox R20A installation, whether flush or surface mounted. We provide complete design, installation, and ongoing support for Akuvox access control across Melbourne and regional Victoria.