AJAX Transmitter Jeweller - Wired Integration Module (White)
Key Specifications
Core Features
Technical Specifications
| Category | Specification |
|---|---|
| Product name | Transmitter Jeweller |
| Type | Wireless module to integrate one third-party device into the Ajax system |
| Jeweller frequency bands | 866.0-866.5, 868.0-868.6, 868.7-869.2, 905.0-926.5, 915.85-926.5 and 921.0-922.0 MHz, depending on the sales region |
| Maximum effective radiated power | Up to 20 mW, with automatic power control |
| Radio signal modulation | GFSK |
| Radio communication range | Up to 1,600 m between the integration module and a hub (or range extender) in open space |
| Wired connection | Two pairs of terminal inputs for tamper and alarm sensor, AATT scheme |
| Terminals | + - 3.3 V output, ALARM inputs, TAMP inputs |
| Third-party device contact states | NO, NC |
| Tamper contact states | NO, NC |
| Cable length | Up to 130 m with 24 AWG twisted pair cable |
| Operating modes | Pulse, bistable |
| Sensor modes | Notify of alarms, switch arming modes |
| Event types | 14 event types of wired devices, set by a PRO or a user with admin rights in the Ajax app |
| Recommended installation | Inside the wired detector enclosure, minimum space 110 x 41 x 24 mm, or in a radiotransparent casing |
| Sabotage protection | Integration module authentication, accelerometer, tamper alarm terminals, communication loss detection after 36 s |
| Battery | 3 x CR123A, pre-installed. Battery life depends on the power consumption of the wired device |
| Output to the wired device | 3.3 V, up to 125 mA, one power supply line |
| Board dimensions | 100 x 39 x 22 mm |
| Weight | 74 g |
| Operating temperature | -25 to +50 degrees C |
| Operating humidity | Up to 75% |
| Electric shock protection | Class III |
| Complete set | Transmitter Jeweller, 3 x CR123A battery (pre-installed), installation kit, quick start guide |
| Warranty | 24 months, as published by Ajax Systems |
Downloads
- Technical specifications Web page · ajax.systems · Ajax Systems
- User manual Web page · ajax.systems · Ajax Systems
- EU Declaration of Conformity PDF · ajax.systems · Ajax Systems, PDF
Documents are published by the manufacturer and open in a new tab. Specifications can change between production batches, so check the document for your exact model.
Similar products
Questions and answers
No questions about this product yet. Ask ours first, and a licensed installer will answer.
Get a quote for this product
Prefer the full form?
Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.
The full quote form opens as you scroll here.
Frequently Asked Questions
It connects one third-party wired device, such as a wired detector, to an Ajax system wirelessly, so its alarms and tamper show in the Ajax app.
One. For up to 18 wired zones, Ajax makes the MultiTransmitter.
NO or NC contacts for both the alarm and the tamper input, in pulse or bistable mode.
14 event types, including intrusion, fire, auxiliary alarm, panic button, gas, leakage, glass break and vibration, set in the Ajax app.
Up to 130 m with 24 AWG twisted pair cable.
Ajax says to install it inside the wired detector enclosure, which needs at least 110 x 41 x 24 mm, or in any radiotransparent casing.
The Transmitter Jeweller board, 3 pre-installed CR123A batteries, an installation kit and a quick start guide.
Yes. We supply and install Ajax systems across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.
Get the AJAX Transmitter Jeweller Installed by Sipko Security
Sipko Security supplies and installs the AJAX Transmitter Jeweller across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.
