Akuvox A01 Access Control Terminal
The Akuvox A01 is an IP-based access control terminal that combines a door controller and a multi-frequency RFID reader in one standalone device, behind a toughened glass front and aluminum alloy frame. It supports RFID card and NFC access, runs a Linux operating system, stores up to 20,000 cards and 100,000 event logs, and is rated IP65 and IK07 for outdoor use on doors, gates, and lift lobbies.
Key Specifications
Core Features
Technical Specifications
| Category | Specification |
|---|---|
| Model | A01S |
| Colour | Black |
| Front Panel | Toughened glass |
| Frame | Aluminum alloy |
| Operating System | Linux |
| RFID Card Reader | 13.56MHz & 125kHz |
| Access Methods | RFID card, NFC |
| User / Card Capacity | 20,000 |
| Event Log Capacity | 100,000 |
| Relay Out | 1 |
| Inputs | 2 |
| Wiegand | Supported |
| Speaker | 1 |
| Tamper-Proof Alarm | Supported |
| Ethernet Port | RJ45, 10/100Mbps adaptive |
| Networking Protocols | IPv4, HTTP, HTTPS, FTP, DNS, NTP, TCP, UDP, ICMP, DHCP, ARP |
| Power Supply | 802.3af Power-over-Ethernet, or 12V DC connector |
| Ingress Protection | IP65 |
| Impact Protection | IK07 |
| Installation | Flush-mounted or wall-mounted |
| Dimensions | 86 x 86 x 33mm |
| Working Humidity | 10~90%, non-condensing |
| Working Temperature | -20°C to +55°C |
| Storage Temperature | -30°C to +70°C |
| Platform Compatibility | Akuvox Cloud, ACMS |
Similar products
Questions and answers
No questions about this product yet. Ask ours first, and a licensed installer will answer.
Get a quote for this product
Prefer the full form?
Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.
The full quote form opens as you scroll here.
Frequently Asked Questions
The A01 is a standalone access control terminal used to secure doors, gates, and lift lobbies. It combines a door controller and RFID/NFC reader in one device, triggering a door strike via its relay output.
No. The A01 has a toughened glass front with no physical keypad, and is opened using an RFID card or an NFC-enabled mobile phone. Sites that need PIN code entry should use the Akuvox A02, which adds a touch keypad.
Yes. Its toughened glass and aluminum alloy housing is rated IP65 for water and dust ingress and IK07 for impact resistance, with a working temperature range of -20°C to +55°C, making it suitable for exposed outdoor entry points.
It supports 802.3af Power-over-Ethernet for single-cable installation, or a 12V DC connector where a PoE network isn't being used at that door.
Yes. It supports Wiegand output so it can be switched to reader mode and connected to a third-party access control panel, in addition to its own built-in relay output and inputs.
Ready to Install the Akuvox A01?
Contact Sipko Security to request a quote or discuss integrating the A01 access control terminal into your building's doors, gates, or lift lobby access system. We provide complete design, installation, and ongoing support for Akuvox access control across Melbourne and regional Victoria.
