Akuvox E16 In-Wall Box
The Akuvox E16 In-Wall Box is a complete flush-mounting kit for the E16 and A05 door phones, including a flush-mounting box, bracket, and cover board. It recesses into a wall opening of 225 x 111 x 43mm (H x W x D), letting the door phone sit flush with the wall surface for a clean, integrated appearance.
Price on Request
Mounting Accessory · For E16 & A05 Door Phones
Access Control
Complete Flush-Mount Kit
Includes the flush-mounting box, bracket, and cover board needed for a full recessed installation.
Built-In Drainage Gap
Installation instructions call for a gap at the bottom of the box against the wall, so any moisture can drain rather than pool.
225 x 111 x 43mm Wall Opening
Matches the standard wall cavity dimensions specified in Akuvox’s official flush-mounting installation guide.
Shared Fit for E16 & A05
One flush-mounting kit covers both the E16 door phone and the A05 access control terminal.
Melbourne installations: Sipko Security supplies and installs Akuvox E16 door phones with in-wall boxes for new-build and renovation projects. Get a free quote today.
Technical Specifications
Product Details
Mounting Type
Flush / recessed in-wall
Wall Opening Size
225 x 111 x 43mm (H x W x D)
Compatibility
Akuvox E16 & A05
Core Features
Detailed Breakdown
Complete Kit: Includes flush-mounting box, flush-mounting bracket, and flush-mounting board, plus the screws and plastic wall anchors needed for installation.
Cable Routing Built In: Knock-out cable holes in the box let wiring pass through cleanly before the device and cover board are fitted.
Drainage-Conscious Installation: Akuvox’s official guide specifies leaving a gap at the base of the box against the wall to allow moisture to drain.
Straightforward 3-Step Fitting: Bracket installation, device installation, then the cover board, following Akuvox’s official flush-mounting quick guide.
Complete Technical Specifications
Data Table
| Specification | Details |
|---|---|
| Compatibility | Akuvox E16 & A05 door phones |
| Mounting Type | Flush / recessed in-wall |
| Wall Opening (H x W x D) | 225 x 111 x 43mm |
| Kit Contents | Flush-mounting box, flush-mounting bracket, flush-mounting board |
| Fixings Included | M3x8 crosshead screws x7, ST4x20 crosshead screws x4, M4x16 torx head screws x2, plastic wall anchors x4 |
| Anchor Drill Spec | 6mm diameter bit, 25mm depth (per Akuvox installation guide) |
Frequently Asked Questions
Q&A
Yes, Akuvox’s official flush-mounting kit and installation guide cover both the E16 door phone and the A05 access control terminal, which share the same mounting footprint.
Akuvox specifies a square hole of 225mm (height) x 111mm (width) x 43mm (depth) according to the position of the cable.
Akuvox’s installation guide specifies reserving a gap between the bottom of the box and the wall, so any moisture that gets in can drain out rather than collecting inside the box.
Yes, Akuvox also publishes an on-wall mounting guide for the E16 for sites where flush mounting isn’t practical. Ask Sipko Security which option suits your installation.
Planning a Flush-Mounted E16 Installation?
Contact Sipko Security to add an in-wall box to your Akuvox E16 or A05 order, or to plan a new-build or renovation installation with a flush-mounted door phone. We provide complete design, installation, and ongoing support for Akuvox access control across Melbourne and regional Victoria.