Hikvision DS-2CD2387G3-LIS2UY/SL Security Camera: 8MP 4K ColorVu 3.0 Turret, Smart Hybrid Light, AcuSense AI, HikAI‑ISP, Two‑Way Audio, Strobe + Speaker, IP67 & NEMA 4X
The is an advanced fixed turret camera engineered for with that intelligently switches between , , and .
Powered by and , it focuses alerts on and improves clarity in low‑light scenes.
Built‑in enable , while the and custom audio warnings add strong on‑site deterrence.
A$378.00 +GST
A$512.00 · Includes 3 Year Warranty & Support.
Contact SIPKO
8MP 4K ColorVu 3.0
True 3840 × 2160 detail with full‑colour imaging day and night for evidence‑grade footage.
Smart Hybrid Light
Intelligent IR/white/Smart modes help reduce light pollution while keeping night scenes clear (up to ~30 m).
AcuSense AI Detection
Human/vehicle classification reduces false alarms from rain, leaves, pets and general motion clutter.
Strobe + Two‑Way Audio
Built‑in dual mic + speaker for two‑way talk, plus active strobe and custom warnings for deterrence.
Melbourne installer note: Smart Hybrid Light works best when we set the right trigger rules, brightness, and schedules.
If you want colour evidence without annoying neighbours, we’ll tune the camera to use IR most of the time and switch to warm light only when a person/vehicle is detected.
For lens advice and placement, use the contact page.
SEO Keywords:
Hikvision DS-2CD2387G3-LIS2UY/SL
· 8MP 4K ColorVu 3.0 turret camera · Smart Hybrid Light · HikAI‑ISP · AcuSense human/vehicle detection · two‑way audio · strobe deterrence · IP67 · NEMA 4X · Melbourne security camera installation
Technical Specifications
Quick‑Read Specs
Resolution
8MP (3840 × 2160) 4K
Field of View
1/1.8″ Progressive Scan CMOS
Lens
Fixed lens options: 2.8 mm (108.8°) or 4.0 mm (93.3°)
Night Illumination
Smart Hybrid Light: IR/White up to ~30 m
AI Analytics
AcuSense deep learning: person/vehicle detection
Audio + Deterrence
Active deterrence: strobe + speaker + dual mic (two‑way)
Compression
microSD up to 512 GB · H.265/H.265+
WDR
IP67 + NEMA 4X · 12VDC / PoE (802.3at Class 4)
Quick‑Read Specs Table
| Specification | Detail |
|---|---|
| Image Sensor | 1/1.8” Progressive Scan CMOS |
| Resolution | 3840 × 2160 (8MP) |
| WDR | 130 dB True WDR |
| Minimum Illumination | 0.0005 Lux @ (F1.0, AGC ON), 0 Lux with light |
| Lens Options | 2.8mm (108.8° H-FOV) or 4.0mm (93.3° H-FOV) |
| Smart Hybrid Light | IR or warm white light up to ~30 m, Smart switching available |
| Audio | Built-in dual microphone + speaker (two-way), custom audio warnings |
| Deterrence | Built-in strobe + speaker alarm |
| Storage | microSD up to 512GB |
| Video Compression | H.265, H.264, H.265+, H.264+ |
| Protection | IP67 weatherproof, NEMA 4X anti-corrosion |
| Power | 12VDC or PoE (802.3at, Class 4) |
| Warranty | 3 Year Warranty & Support |
Installer tip: Choose 2.8mm for wider close-range coverage and 4mm for tighter detail at entrances. In Smart mode, we can keep IR on by default and switch to warm light only on person/vehicle events.
Key Features & Benefits
ColorVu Gen2 + AcuSense
124/7 Full‑Colour with ColorVu 3.0
Vivid colour evidence day and night, supported by ColorVu optics and HikAI‑ISP processing for low-light clarity.
2Smart Hybrid Light Control
Use IR, white light, or Smart mode to reduce unnecessary brightness while keeping night scenes clear (up to ~30 m).
3AcuSense Human/Vehicle Detection
Deep learning analytics focus on people and vehicles and reduce false notifications from foliage, weather and general motion.
4Two‑Way Audio + Active Deterrence
Speak and listen in real time using the built-in dual mic + speaker. Trigger strobe and custom warnings for after-hours deterrence.
How Smart Hybrid Light + ColorVu 3.0 works
Explained
ColorVu 3.0 is built for full‑colour video in low light, while Smart Hybrid Light gives you control over how the camera illuminates the scene at night. Run IR for discreet monitoring, use warm white light for colour detail, or enable Smart mode to switch lighting based on detection.
1IR Mode (Discreet)
Infrared illumination for low‑profile night monitoring in residential streets and shared areas.
2White‑Light Mode (Colour Evidence)
Warm light preserves colour detail at night for stronger identification and evidence-grade footage.
3Smart Mode (Best Balance)
Uses IR normally and switches to warm light on person/vehicle events to reduce light pollution.
4Deterrence on Detection
Trigger the strobe and speaker with custom warnings for real-time on-site deterrence.
Ideal Melbourne Applications
Best‑Fit Sites
1Residential Driveways & Front Entrances
Full-colour evidence and two-way audio suit driveways, porches and front doors. Smart mode keeps lighting polite.
2Retail Shopfronts & After‑Hours Monitoring
AcuSense reduces false alerts while strobe/speaker deterrence supports after-hours protection.
3Warehouses, Loading Bays & Car Parks
8MP detail helps cover wide areas. Smart Hybrid Light supports night clarity without continuous bright lighting.
4Harsh Outdoor / Coastal Environments
IP67 + NEMA 4X anti-corrosion housing helps resist rust in humid or salty air for long-term reliability.
Request Your Melbourne Installation Quote
Melbourne Service
Tell us where you want coverage (driveway, shopfront, warehouse), whether you prefer discreet IR or colour white‑light at night, and which lens you want (2.8mm wide or 4mm focused).
We’ll recommend mounting position, lighting mode and deterrence settings so alerts stay useful and footage stays evidence‑ready.
Prefer to talk? Use our contact page.
Frequently Asked Questions
10 FAQs
Yes. As a ColorVu 3.0 model, it is designed for 24/7 colour imaging. Smart Hybrid Light lets you use warm white light for colour detail, IR for discreet monitoring, or Smart mode to switch based on detection.
Smart Hybrid Light offers IR mode, white-light mode, or Smart mode. In Smart mode the camera can use IR normally and switch to warm light when a person or vehicle is detected.
Yes. AcuSense deep learning analytics classify people and vehicles and ignore many non-relevant triggers like rain, leaves, insects, or general motion.
Yes. It has built-in dual microphones and a speaker for two-way audio, so you can listen and speak in real time from your NVR or Hik-Connect setup.
On events such as motion or perimeter rules, you can trigger the strobe and play custom audio warnings. Schedules and sensitivity can be tuned so deterrence runs only after hours.
Yes. With IP67 weather protection and NEMA 4X anti-corrosion housing, it is designed for humid, marine, or corrosive environments where rust resistance matters.
Choose 2.8mm for wider coverage (yards, shop floors). Choose 4mm for a more focused view (entrances, corridors, longer approaches).
Yes. It supports microSD card storage up to 512GB for local recording. For longer retention and easier playback, a compatible NVR is recommended.
It supports 12VDC or PoE (802.3at, Class 4) for flexible installation.
Includes 3 Year Warranty & Support. For installation and configuration help in Melbourne, reach out via our contact page.
Price & Market Reference
AUD (+GST)
Current pricing for the Hikvision DS-2CD2387G3-LIS2UY/SL is A$378.00 +GST (previously A$512.00), including 3 Year Warranty & Support.
For the best results, plan placement and Smart Hybrid Light settings together. For a tailored recommendation, use our contact form.
Note: Final installation pricing varies based on cable routes, mounting height, number of cameras, recorder choice, and site access requirements.