AJAX #80808 Wall Pole Mount Bracket White | Professional Australian Made Outdoor Motion Sensor Mount Bracket

The Wall/Pole Mount Bracket White supports three installation methods: wall mounting using the four 5.5mm holes with appropriate fasteners, pole mounting using the included ultra-heavy duty cable tie (suitable for poles 50-200mm diameter), and fence post mounting using the cable tie or optional hose clamp. It provides flexible installation for any outdoor perimeter security setup.

Yes, the AJAX #80808 includes one ultra-heavy duty cable tie (580 x 12.4mm) held together by two small cable ties. This cable tie is designed for poles up to 200mm diameter. For smaller poles (up to 14mm), you can optionally add a stainless steel hose clamp for additional security (not supplied).

Yes. The bracket features upper and lower clevis lugs with 15° angle increments marked on top. This allows you to adjust the detector’s pan angle in 15° steps using the pivot pin and M4 cap head screw. This provides flexible field-of-view optimization after installation.

For wall mounting: Drill with 4mm and 5.5mm bits, appropriate wall fasteners for your wall type. For pole mounting: The included cable tie (no additional tools needed for installation). You’ll need a 4mm drill to pre-drill holes in the SmartBracket mounting panel during initial assembly. Optional: stainless steel hose clamp (for pole support up to 14mm diameter).

Yes, the AJAX #80808 is compatible with both AJAX MotionProtect Outdoor White and MotionCam Outdoor White sensors. Both sensors use the same SmartBracket mounting panel interface, so the bracket works with either detector model.

The bracket uses a 10mm aluminium pivot rod inserted through both upper and lower clevis lugs. The pivot pin locks into place. Once mounted, you can align the detector at the desired angle and secure it using an M4 x 60mm stainless steel cap head screw threaded into an M4 Nyloc nut. A lower cover panel (included) provides additional security against tampering.

The bracket is water-resistant and UV-resistant thanks to its PETG HF material. PETG HF maintains the strengths of regular PETG, providing superior resistance to water, UV, and outdoor temperatures. While not fully sealed, it’s engineered for Australian outdoor conditions and will withstand rain, dust, and Melbourne’s variable climate over extended periods.

PETG HF (High Flow) provides superior outdoor durability compared to PLA. While the ceiling bracket uses PLA Matt (optimized for indoor use), this outdoor wall/pole bracket uses PETG HF because it offers better UV resistance, water resistance, and temperature resistance—essential for long-term outdoor installations in harsh conditions like Melbourne weather.

This bracket (SKU #80808) is specifically designed for white outdoor sensors. AJAX also offers this bracket in Black and Graphite variants for those color options. The mounting mechanism is identical across all color variants—only the aesthetic finish differs for color matching.