AJAX MultiTransmitter Jeweller - Wired Integration Module (White)
Key Specifications
Core Features
Technical Specifications
| Category | Specification |
|---|---|
| Product name | MultiTransmitter Jeweller |
| Type | Wireless module to integrate up to 18 third-party devices into the Ajax system |
| Jeweller frequency bands | 866.0-866.5, 868.0-868.6, 868.7-869.2, 905.0-926.5, 915.85-926.5 and 921.0-922.0 MHz, depending on the sales region |
| Maximum effective radiated power | Up to 20 mW |
| Radio signal modulation | GFSK |
| Radio signal range | Up to 2,000 m between the module and a control panel (or range extender) in open space |
| Number of zones | 18 wired zones, several devices per zone depending on their power consumption |
| Type of connection | NC, NO, EOL (firmware below 2.13). NC, NO, EOL, 2EOL, 3EOL (firmware 2.13.0 or later) |
| EOL resistance | 1 to 7.5 kOhm in 100 Ohm steps (firmware below 2.13). 1 to 15 kOhm per resistor, up to 30 kOhm in total (firmware 2.13 or later) |
| Cable length | Up to 400 m with a 0.22 mm2 copper-clad aluminium signal cable |
| Operation mode | Pulse, bistable |
| Event types | 15 event types of wired devices, set by a PRO or a user with admin rights in the Ajax app |
| Sabotage protection | Two tampers, device authentication, communication loss detection within 36 s |
| Fault detection | Instant detection of wired connection loss, short circuits and malfunctions with EOL, 2EOL or 3EOL |
| Main power | 100-240 V AC, 50/60 Hz, type A, for use inside the supervised premises |
| Current consumption | Quiescent 14.6 mA, maximum 69.6 mA at nominal voltage |
| Backup power | 12 V battery, up to 7 Ah, full charge cycle up to 30 hours. The battery is not included |
| Backup run time | Average 33 mA without detectors. With a 7 Ah battery at 1 A load, at least 7 hours; for 12 or 24 hours, no more than 0.55 A or 0.28 A |
| Power for connected devices | 10.5-15 V, up to 1 A in total. Two power lines for other devices, one for fire detectors |
| Dimensions | 192 x 238 x 100 mm |
| Weight | 874 g white, 802 g black |
| Operating temperature | -10 to +40 degrees C |
| Operating humidity | Up to 75% |
| Protection class | IP40, IK06, indoor use only |
| Colours | Black or white |
| Complete set | MultiTransmitter Jeweller board, casing, power cable, screw terminal block adapter (only for INCERT compliance), 12 V battery connection cable, installation kit, quick start guide |
| Warranty | 24 months, as published by Ajax Systems |
Downloads
- Technical specifications Web page · ajax.systems · Ajax Systems
- User manual Web page · ajax.systems · Ajax Systems
- EU Declaration of Conformity PDF · ajax.systems · Ajax Systems, PDF
Documents are published by the manufacturer and open in a new tab. Specifications can change between production batches, so check the document for your exact model.
Similar products
Questions and answers
No questions about this product yet. Ask ours first, and a licensed installer will answer.
Get a quote for this product
Prefer the full form?
Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.
The full quote form opens as you scroll here.
Frequently Asked Questions
It integrates up to 18 third-party wired devices, such as wired detectors, into the Ajax system over 18 wired zones.
Up to 2,000 m between the module and the control panel or a range extender in open space.
NC, NO and EOL. With firmware 2.13.0 or later it also supports 2EOL and 3EOL, which needs a compatible hub on OS Malevich 2.13 or later.
Yes. It runs from 100 to 240 V mains and has a connection for a 12 V backup battery up to 7 Ah. The battery is not included.
Up to 400 m with a 0.22 mm2 copper-clad aluminium signal cable.
No. Ajax designs it for indoor use only, with IP40 and IK06 protection.
The board, casing, power cable, a screw terminal block adapter (only for INCERT compliance), a 12 V battery connection cable, an installation kit and a quick start guide.
Yes. We supply and install Ajax systems across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.
Get the AJAX MultiTransmitter Jeweller Installed by Sipko Security
Sipko Security supplies and installs the AJAX MultiTransmitter Jeweller across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.
