0406 432 691
Mon–Sat 8am–6pm
Licensed & Insured
Free Onsite Quote
Melbourne & Mornington Peninsula
All products›Alarm Systems›AJAX MotionProtect Outdoor Jeweller
Security Products Melbourne

AJAX MotionProtect Outdoor Jeweller

SKU: AJAX-MOTIONPROTECT-OUTDOOR-JEWELLER
In Stock
The AJAX MotionProtect Outdoor Jeweller is a wireless infrared motion detector for outdoor and indoor use. It has two PIR sensors, an adjustable detection distance of 3 to 15 m at an installation height of 0.8 to 1.3 m, an anti-masking system, and the LISA and SmartDetect algorithms to prevent false alarms. It works from -25 to +60 degrees C with IP55 protection and runs for up to 5 years on 2 pre-installed CR123A batteries.
Outdoor and indoor Anti-masking
Price on Request
Request a Quote
Call me back
Outdoor and indoor IP55 protection and an operating range of -25 to +60 degrees C.
Adjustable distance 3 to 15 m at a height of 0.8 to 1.3 m, set with a scrollbar on the enclosure.
Anti-masking Detects attempts to block the detector view. Ajax advises a Hood to protect it from rain and snow.
Up to 5 years on batteries Two pre-installed CR123A batteries, or an optional external 5 to 28 V supply with the batteries as backup.
Specifications on this page follow the Ajax Systems technical specifications for MotionProtect Outdoor Jeweller. Check the manual for your exact model.

Key Specifications

Sensors
2 x PIR
Distance
3-15 m adjustable
Angle
90 degrees horizontal
Radio range
Up to 1,700 m
Temperature
-25 to +60 degrees C
Protection
IP55
Size
183 x 70 x 65 mm
Warranty
24 months

Core Features

Two PIR sensors: A wireless infrared motion detector with 2 PIR sensors for outdoor and indoor use.
Detection range: 3 to 15 m at a height of 0.8 to 1.3 m, adjusted with a scrollbar. Horizontal angle 90 degrees, speeds from 0.3 to 2.0 m/s.
Pet immunity: Pets up to 80 cm in height are ignored (weight is not relevant).
False alarm prevention: LISA and SmartDetect software algorithms, with temperature compensation from -25 to +60 degrees C.
Anti-masking: Detects attempts to block the detector view. Install the Hood to protect it from rain and snow.
Tamper alarm: Notifies on attempts to detach the detector from the surface or remove it from the mounting panel.
Power: 2 x CR123A (up to 5 years), or an external 5 to 28 V supply from 200 mA with the batteries as backup.
In the box: The detector, SmartBracket mounting panel, installation kit, 2 pre-installed CR123A batteries and quick start guide.

Technical Specifications

Category Specification
Product name MotionProtect Outdoor Jeweller
Type Wireless IR motion detector for outdoor and indoor use
Jeweller frequency bands 866.0-866.5, 868.0-868.6, 868.7-869.2, 905.0-926.5, 915.85-926.5 and 921.0-922.0 MHz, depending on the sales region
Maximum effective radiated power Up to 20 mW, with automatic power control
Radio signal modulation GFSK
Radio communication range Up to 1,700 m between the device and a hub (or range extender) in open space
Sensitive elements 2 x PIR sensor
Motion detection distance 3-15 m at a height of 0.8-1.3 m, adjusted with a scrollbar on the enclosure
Motion detection angle Horizontal 90 degrees
Motion detection speed 0.3 to 2.0 m/s
Sensitivity 3 levels
Pet immunity Height up to 80 cm, weight not relevant
False alarm prevention LISA and SmartDetect software algorithms
Temperature compensation Effective motion detection from -25 to +60 degrees C
Recommended height 0.8-1.3 m. Install the Hood to protect the anti-masking system from rain and snow
Sabotage protection Tamper alarm, device authentication, anti-masking system, communication loss detection after 36 s
Main power 2 x CR123A, pre-installed, type C, full capacity 3,200 mAh
Calculated battery life Up to 5 years
Operating voltage 2.1-3.3 V, nominal 3 V
Current consumption Quiescent 79 uA, maximum 58.8 mA at nominal voltage
Optional external power 5-28 V from 200 mA, the batteries serve as backup
Dimensions 183 x 70 x 65 mm
Weight 322 g
Operating temperature -25 to +60 degrees C
Operating humidity Up to 95%
Protection class IP55
Colour White
Complete set MotionProtect Outdoor Jeweller, SmartBracket mounting panel, installation kit, 2 x CR123A battery (pre-installed), quick start guide
Warranty 24 months, as published by Ajax Systems

Downloads

Documents are published by the manufacturer and open in a new tab. Specifications can change between production batches, so check the document for your exact model.

Questions and answers

No questions about this product yet. Ask ours first, and a licensed installer will answer.

Ask a question

Questions are shown once we have answered them. For something urgent, call 0406 432 691.

Get a quote for this product

Quick request

Name and phone, that is all. We will get back to you the same day, Monday to Saturday.

What would you like?

We use your details only to answer this request. Privacy policy

Prefer the full form?

Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.

The full quote form opens as you scroll here.

Frequently Asked Questions

Yes. Ajax designs it for outdoor and indoor use, with IP55 protection and an operating range of -25 to +60 degrees C.

3 to 15 m when installed at a height of 0.8 to 1.3 m, adjusted with a scrollbar on the enclosure, across 90 degrees.

It ignores pets up to 80 cm in height. Weight is not relevant.

It detects attempts to block the detector view. Ajax advises installing the Hood to protect it from rain and snow.

Two pre-installed CR123A batteries give up to 5 years. An optional external 5 to 28 V supply can be used, with the batteries as backup.

Up to 1,700 m to a hub or range extender in open space. Obstacles reduce the range.

The detector, a SmartBracket mounting panel, an installation kit, 2 pre-installed CR123A batteries and a quick start guide. The Hood is sold separately.

Yes. We supply and install Ajax systems across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.

Get the AJAX MotionProtect Outdoor Jeweller Installed by Sipko Security

Sipko Security supplies and installs the AJAX MotionProtect Outdoor Jeweller across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.

0
0
Your Cart
Empty CartYour cart is emptyReturn to Shop

Areas we serve