AJAX MotionProtect Outdoor Jeweller
Key Specifications
Core Features
Technical Specifications
| Category | Specification |
|---|---|
| Product name | MotionProtect Outdoor Jeweller |
| Type | Wireless IR motion detector for outdoor and indoor use |
| Jeweller frequency bands | 866.0-866.5, 868.0-868.6, 868.7-869.2, 905.0-926.5, 915.85-926.5 and 921.0-922.0 MHz, depending on the sales region |
| Maximum effective radiated power | Up to 20 mW, with automatic power control |
| Radio signal modulation | GFSK |
| Radio communication range | Up to 1,700 m between the device and a hub (or range extender) in open space |
| Sensitive elements | 2 x PIR sensor |
| Motion detection distance | 3-15 m at a height of 0.8-1.3 m, adjusted with a scrollbar on the enclosure |
| Motion detection angle | Horizontal 90 degrees |
| Motion detection speed | 0.3 to 2.0 m/s |
| Sensitivity | 3 levels |
| Pet immunity | Height up to 80 cm, weight not relevant |
| False alarm prevention | LISA and SmartDetect software algorithms |
| Temperature compensation | Effective motion detection from -25 to +60 degrees C |
| Recommended height | 0.8-1.3 m. Install the Hood to protect the anti-masking system from rain and snow |
| Sabotage protection | Tamper alarm, device authentication, anti-masking system, communication loss detection after 36 s |
| Main power | 2 x CR123A, pre-installed, type C, full capacity 3,200 mAh |
| Calculated battery life | Up to 5 years |
| Operating voltage | 2.1-3.3 V, nominal 3 V |
| Current consumption | Quiescent 79 uA, maximum 58.8 mA at nominal voltage |
| Optional external power | 5-28 V from 200 mA, the batteries serve as backup |
| Dimensions | 183 x 70 x 65 mm |
| Weight | 322 g |
| Operating temperature | -25 to +60 degrees C |
| Operating humidity | Up to 95% |
| Protection class | IP55 |
| Colour | White |
| Complete set | MotionProtect Outdoor Jeweller, SmartBracket mounting panel, installation kit, 2 x CR123A battery (pre-installed), quick start guide |
| Warranty | 24 months, as published by Ajax Systems |
Downloads
- Technical specifications Web page · ajax.systems · Ajax Systems
- User manual Web page · ajax.systems · Ajax Systems
- EU Declaration of Conformity PDF · ajax.systems · Ajax Systems, PDF
Documents are published by the manufacturer and open in a new tab. Specifications can change between production batches, so check the document for your exact model.
Similar products
Questions and answers
No questions about this product yet. Ask ours first, and a licensed installer will answer.
Get a quote for this product
Prefer the full form?
Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.
The full quote form opens as you scroll here.
Frequently Asked Questions
Yes. Ajax designs it for outdoor and indoor use, with IP55 protection and an operating range of -25 to +60 degrees C.
3 to 15 m when installed at a height of 0.8 to 1.3 m, adjusted with a scrollbar on the enclosure, across 90 degrees.
It ignores pets up to 80 cm in height. Weight is not relevant.
It detects attempts to block the detector view. Ajax advises installing the Hood to protect it from rain and snow.
Two pre-installed CR123A batteries give up to 5 years. An optional external 5 to 28 V supply can be used, with the batteries as backup.
Up to 1,700 m to a hub or range extender in open space. Obstacles reduce the range.
The detector, a SmartBracket mounting panel, an installation kit, 2 pre-installed CR123A batteries and a quick start guide. The Hood is sold separately.
Yes. We supply and install Ajax systems across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.
Get the AJAX MotionProtect Outdoor Jeweller Installed by Sipko Security
Sipko Security supplies and installs the AJAX MotionProtect Outdoor Jeweller across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.
