0406 432 691
Mon–Sat 8am–6pm
Licensed & Insured
Free Onsite Quote
Melbourne & Mornington Peninsula
All products›Alarm Systems›AJAX MultiTransmitter Jeweller – Wired Integration Module (White)
Security Products Melbourne

AJAX MultiTransmitter Jeweller - Wired Integration Module (White)

SKU: AJAX-MULTITRANSMITTER-WHITE
In Stock
The AJAX MultiTransmitter Jeweller is a wireless module that integrates up to 18 third-party wired devices into the Ajax system, with 18 wired zones. It works up to 2,000 m from the control panel in open space, supports NC, NO and EOL connections (2EOL and 3EOL on newer firmware), and reports 15 event types. It is powered from 100 to 240 V mains, has a connection for a 12 V backup battery (not included), and is designed for indoor use only.
18 wired zones Mains powered
Price on Request
Request a Quote
Call me back
18 wired zones Several devices can be connected to one zone, depending on their power consumption.
EOL connections NC, NO and EOL, plus 2EOL and 3EOL on firmware 2.13.0 or later, with instant detection of wire loss and short circuits.
Powers the devices Powered from 100 to 240 V mains. Two power lines of 10.5 to 15 V, up to 1 A in total, for other devices, one for fire detectors.
Backup battery A 12 V backup battery up to 7 Ah can be connected. The battery is not included.
Specifications on this page follow the Ajax Systems technical specifications for MultiTransmitter Jeweller. Check the manual for your exact model.

Key Specifications

Wired zones
18
Radio range
Up to 2,000 m
Cable length
Up to 400 m
Mains
100-240 V AC
Size
192 x 238 x 100 mm
Weight
874 g white
Protection
IP40, IK06
Warranty
24 months

Core Features

18 wired zones: Integrates up to 18 third-party wired devices. Multiple devices can be connected to one zone, depending on their power consumption.
Connection types: NC, NO, EOL. With firmware 2.13.0 or later, also 2EOL and 3EOL (needs a compatible hub on OS Malevich 2.13 or later).
15 event types: Tamper alarm, intrusion, fire, auxiliary alarm, panic button, gas, malfunction, leakage, glass break and more, set in the Ajax app.
Cable length: Up to 400 m with a signal cable with a 0.22 mm2 copper-clad aluminium conductor.
Instant fault detection: With EOL, 2EOL or 3EOL connection types it detects wired connection loss, short circuits and malfunctions instantly.
Tamper protection: Two tampers detect opening of the casing and detachment from the wall.
Power: Mains 100 to 240 V, 50/60 Hz, plus a 12 V backup battery connection (up to 7 Ah, not included). Quiescent 14.6 mA, maximum 69.6 mA.
In the box: The board, casing, power cable, screw terminal block adapter (only for INCERT compliance), 12 V battery connection cable, installation kit and quick start guide.

Technical Specifications

Category Specification
Product name MultiTransmitter Jeweller
Type Wireless module to integrate up to 18 third-party devices into the Ajax system
Jeweller frequency bands 866.0-866.5, 868.0-868.6, 868.7-869.2, 905.0-926.5, 915.85-926.5 and 921.0-922.0 MHz, depending on the sales region
Maximum effective radiated power Up to 20 mW
Radio signal modulation GFSK
Radio signal range Up to 2,000 m between the module and a control panel (or range extender) in open space
Number of zones 18 wired zones, several devices per zone depending on their power consumption
Type of connection NC, NO, EOL (firmware below 2.13). NC, NO, EOL, 2EOL, 3EOL (firmware 2.13.0 or later)
EOL resistance 1 to 7.5 kOhm in 100 Ohm steps (firmware below 2.13). 1 to 15 kOhm per resistor, up to 30 kOhm in total (firmware 2.13 or later)
Cable length Up to 400 m with a 0.22 mm2 copper-clad aluminium signal cable
Operation mode Pulse, bistable
Event types 15 event types of wired devices, set by a PRO or a user with admin rights in the Ajax app
Sabotage protection Two tampers, device authentication, communication loss detection within 36 s
Fault detection Instant detection of wired connection loss, short circuits and malfunctions with EOL, 2EOL or 3EOL
Main power 100-240 V AC, 50/60 Hz, type A, for use inside the supervised premises
Current consumption Quiescent 14.6 mA, maximum 69.6 mA at nominal voltage
Backup power 12 V battery, up to 7 Ah, full charge cycle up to 30 hours. The battery is not included
Backup run time Average 33 mA without detectors. With a 7 Ah battery at 1 A load, at least 7 hours; for 12 or 24 hours, no more than 0.55 A or 0.28 A
Power for connected devices 10.5-15 V, up to 1 A in total. Two power lines for other devices, one for fire detectors
Dimensions 192 x 238 x 100 mm
Weight 874 g white, 802 g black
Operating temperature -10 to +40 degrees C
Operating humidity Up to 75%
Protection class IP40, IK06, indoor use only
Colours Black or white
Complete set MultiTransmitter Jeweller board, casing, power cable, screw terminal block adapter (only for INCERT compliance), 12 V battery connection cable, installation kit, quick start guide
Warranty 24 months, as published by Ajax Systems

Downloads

Documents are published by the manufacturer and open in a new tab. Specifications can change between production batches, so check the document for your exact model.

Questions and answers

No questions about this product yet. Ask ours first, and a licensed installer will answer.

Ask a question

Questions are shown once we have answered them. For something urgent, call 0406 432 691.

Get a quote for this product

Quick request

Name and phone, that is all. We will get back to you the same day, Monday to Saturday.

What would you like?

We use your details only to answer this request. Privacy policy

Prefer the full form?

Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.

The full quote form opens as you scroll here.

Frequently Asked Questions

It integrates up to 18 third-party wired devices, such as wired detectors, into the Ajax system over 18 wired zones.

Up to 2,000 m between the module and the control panel or a range extender in open space.

NC, NO and EOL. With firmware 2.13.0 or later it also supports 2EOL and 3EOL, which needs a compatible hub on OS Malevich 2.13 or later.

Yes. It runs from 100 to 240 V mains and has a connection for a 12 V backup battery up to 7 Ah. The battery is not included.

Up to 400 m with a 0.22 mm2 copper-clad aluminium signal cable.

No. Ajax designs it for indoor use only, with IP40 and IK06 protection.

The board, casing, power cable, a screw terminal block adapter (only for INCERT compliance), a 12 V battery connection cable, an installation kit and a quick start guide.

Yes. We supply and install Ajax systems across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.

Get the AJAX MultiTransmitter Jeweller Installed by Sipko Security

Sipko Security supplies and installs the AJAX MultiTransmitter Jeweller across Melbourne and the Mornington Peninsula. Request a quote and we will plan the installation with you.

0
0
Your Cart
Empty CartYour cart is emptyReturn to Shop

Areas we serve