Bosch B426 Ethernet Communication Module (SDI2/IP) for Control Panels | Melbourne
The Bosch B426 is a Conettix Ethernet communication module that connects compatible Bosch control panels to IP networks via the SDI2 or Option bus. Enables two‑way IP reporting with AES encryption (128/192/256‑bit), remote programming, and advanced supervision. Supports IPv4/IPv6, UPnP for easy firewall traversal, and is UL864/NFPA72 listed for fire applications. Ideal for high‑security commercial and residential installations.
$159.00 +GST
Includes B426 module, mounting bracket, installation guide. 3‑year warranty.
In stock
NIST AES Encryption
FIPS‑197 certified 128/192/256‑bit AES line security for ultra‑secure reporting.
Two‑way IP
Full event reporting and remote programming over IPv4/IPv6 networks.
Plug & Play
UPnP, Auto IP, DHCP – no computer needed for typical installs.
Wide compatibility
Works with B/G series, GV4, D72/74/94, AMAX, Solution 2000/3000, and more.
Compatibility note: For AMAX and Solution series, B426‑M variant is recommended. Please verify panel support before ordering.
Keywords:
Bosch B426
· Ethernet module · IP communicator · AES encryption · SDI2 · remote programming · Melbourne
Technical Specifications
Quick Specs
Network
10/100 Base‑T Ethernet; IPv4/IPv6; DHCP, Auto IP, UPnP, static IP
Encryption
AES 128/192/256‑bit (NIST FIPS‑197 certified); anti‑replay, anti‑substitution
Power
12 VDC nominal; 80 mA standby, 100 mA max
Dimensions
108 × 59.5 × 16 mm (4.25 × 2.19 × 0.63 in)
Environmental
0°C to +49°C; humidity up to 93% non‑condensing; indoor only
Bus compatibility
SDI2 / Option bus; address switch; supports up to 300 m (18 AWG)
Applications
A‑Link Plus, RPS, Remote Security Control, PC9000, IS2000
Certifications
UL 365, 609, 864, 985, 1023, 1076, 1610; RCM, CE, FCC, INCERT
Order number: B426. For AMAX/2000/3000 use B426‑M. Includes mounting bracket and screws.
Why Choose This Bosch IP Module
Secure & future‑proof
1
Top‑tier encryption
NIST FIPS‑197 AES encryption ensures all communications are secure against interception.
2
Rapid deployment
UPnP, Auto IP, and DHCP allow plug‑and‑play installation – no laptop required for basic setups.
3
Broad panel support
Works with hundreds of Bosch control panels (B/G series, GV4, D72/74/94, AMAX, Solution, etc.)
4
Fire & life safety
UL864/NFPA72 listed for fire monitoring applications – meets stringent standards.
Simple Installation Process
Step‑by‑step
1
Power down panel
Disconnect AC and battery before installation.
2
Mount module
Attach mounting bracket to enclosure; secure B426 with screws.
3
Connect bus & Ethernet
Wire data bus (PWR, A, B, COM) to panel. Plug in Cat5/6 to RJ45.
4
Configure & test
Set address switch; power up; access web interface or use RPS to configure IP/encryption.
Tip: For remote programming behind a firewall, enable UPnP on your router – the module will automatically map ports.
Request Your Free Quote / Installation
Fast response
Tell us about your Bosch panel model and your IP communication needs. We’ll provide a clear quote and scope for Melbourne metro areas.
Frequently Asked Questions
10 FAQs
B/G series (B9512G, B8512G, B6512, B5512 etc.), GV4 series (D94/74/72GV4), D72/74/94GV3, DS7220/7240, DS7400XiV4, Easy Series V3+, AMAX 2100/3000/4000 (B426‑M), Solution 2000/3000 (B426‑M).
Yes, you can configure a static IP via the built‑in web interface or RPS software.
AES 128‑, 192‑, or 256‑bit encryption, certified by NIST FIPS‑197.
Yes, it is UL864 and NFPA72 listed for Single Communication Technology fire applications with compatible panels.
Default settings (DHCP, UPnP) work in many networks. For advanced settings, use the web interface or RPS.
300 m (1000 ft) with 18 AWG; 150 m (500 ft) with 22 AWG.
Yes, fully supports IPv6 and IPv4 networks.
Yes, RPS / RPS Lite fully supports remote programming via the B426.
B426‑M is a variant for AMAX and Solution series panels. For most other Bosch panels, B426 is used.
3 years back to base.
Price Check Snapshot
Market reference
The Bosch B426 Ethernet Communication Module is priced at $159.00 + GST. Bulk discounts may apply. Contact us with your quantity – we’ll confirm availability and any applicable discounts. If you have a like‑for‑like quote from another supplier, we’ll do our best to match it.