AJAX REX 2 Range Extender
Key Specifications
Core Features
Technical Specifications
| Category | Specification |
|---|---|
| Product name | ReX 2 Jeweller |
| Type | Wireless radio signal range extender supporting Jeweller and Wings protocols |
| ReX 2 connected to the hub | Up to 5, for all compatible hub models |
| Devices connected to ReX 2 | Up to 199, depends on the hub model |
| Jeweller frequency bands | 866.0-866.5, 868.0-868.6, 868.7-869.2, 905.0-926.5, 915.85-926.5 and 921.0-922.0 MHz, depending on the sales region |
| Maximum effective radiated power | Up to 25 mW, with automatic power control |
| Radio signal modulation | GFSK |
| Radio communication range (Jeweller and Wings) | Up to 1,700 m between the range extender and a hub in open space |
| Encryption | Block encryption with a dynamic key, frequency hopping |
| Ethernet | 1 x 8P8C socket, up to 100 Mbps |
| Alarm delivery time to the hub | 0.3 s |
| Photo delivery time to the hub | 18 s over Wings, 10 s over Ethernet, depends on the settings |
| Sabotage protection | Tamper alarm, device authentication, communication loss detection after 36 s |
| Main power | 110-240 V, 50/60 Hz, up to 10 W |
| Backup battery | Built-in rechargeable Li-ion 2 Ah |
| Calculated battery life | Up to 38 hours with Ethernet off (average 41 mA), up to 12 hours with Ethernet on (average 161 mA) |
| Time to recharge to 80% | Up to 4 hours |
| Power supply type | Type A |
| Current consumption | Quiescent 14.5 mA, maximum 95.8 mA at nominal voltage |
| Alternative power | 6 V (6V PSU type A) or 12-24 V (12-24V PSU type A), both sold separately |
| Dimensions | 163 x 163 x 36 mm |
| Weight | 364 g white, 336 g black |
| Operating temperature | -10 to +40 degrees C |
| Operating humidity | Up to 75% |
| Protection class | IP30, IK06, indoor use only |
| Colours | Black or white |
| Complete set | ReX 2 Jeweller, SmartBracket mounting panel, power cable, screw terminal block adapter (only for INCERT compliance), Ethernet cable, installation kit, quick start guide |
| Warranty | 24 months, as published by Ajax Systems |
Downloads
- Technical specifications Web page · ajax.systems · Ajax Systems
- User manual Web page · ajax.systems · Ajax Systems
Documents are published by the manufacturer and open in a new tab. Specifications can change between production batches, so check the document for your exact model.
Similar products
Questions and answers
No questions about this product yet. Ask ours first, and a licensed installer will answer.
Get a quote for this product
Prefer the full form?
Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.
The full quote form opens as you scroll here.
Frequently Asked Questions
It extends the radio range between an Ajax hub and its Jeweller devices, and carries Wings photo verifications.
Up to 1,700 m between the range extender and a hub in open space. Walls and other obstacles reduce this, so plan the range at the facility.
Up to 199 devices per ReX 2, depending on the hub model, and up to 5 ReX 2 can be connected to one hub.
It runs from 110 to 240 V mains and has a built-in Li-ion battery. Ajax quotes up to 38 hours of backup with Ethernet off and up to 12 hours with Ethernet on.
Yes. It has one 8P8C socket up to 100 Mbps, as an alternative or main communication channel.
No. Ajax designs it for indoor use only, with IP30 and IK06 protection.
The ReX 2, a SmartBracket mounting panel, a power cable, a screw terminal block adapter (only for INCERT compliance), an Ethernet cable, an installation kit and a quick start guide.
Yes. We supply and install Ajax systems across Melbourne and the Mornington Peninsula. Request a quote and we will plan the radio coverage with you.
Get the AJAX REX 2 Range Extender Installed by Sipko Security
Sipko Security supplies, installs and configures the AJAX REX 2 Range Extender for homes and businesses across Melbourne. Contact us for advice and a free quote.
