Dahua DHI-KTP01L-AUS IP Villa Intercom Kit with PoE Switch
The Dahua DHI-KTP01L-AUS is a complete IP video intercom kit that includes everything needed for a standard installation: an aluminium door station with a 2MP 140° camera, a 7" touchscreen indoor monitor, and a 4-port PoE switch to power and connect them.
Including the switch is what sets this kit apart, since PoE intercoms otherwise need one bought separately. You can see and talk to visitors on the screen or through the app on your phone, and unlock the door remotely. The door station supports two locks, mounts either flush or on the surface, and is rated IK07 and IP65. Includes a 3-year warranty.
Key Specifications
Core Features
Technical Specifications
| Category | Specification |
|---|---|
| Product Name | Dahua IP Villa Outdoor Station and Indoor Monitor Kit |
| Model/SKU | DHI-KTP01L-AUS |
| Door Station Model | DHI-VTO2201F-P |
| Door Station Camera | 1/2.9" 2 MP CMOS low illumination colour |
| Field of View | Horizontal 140°; vertical 79.6°; diagonal 159° |
| Focal Length | 2.0 mm |
| WDR | 120 dB |
| Video Compression | H.265 |
| Video Resolution | Main stream 720p @ 25 fps; sub stream 1080p @ 25 fps |
| Video Bit Rate | 256 kbps to 8 Mbps |
| Light Compensation | Auto IR |
| Audio | Two-way, G.711a/G.711u/PCM, echo suppression and digital noise reduction |
| Door Station Ports | 1 RS-485; 1 alarm out; 1 power out (12 VDC 100 mA); exit button; door status detection; lock control; 1 RJ-45 10/100 Mbps |
| Door Station Power | 24 VDC 1 A or standard PoE |
| Door Station Power Consumption | ≤8 W |
| Door Station Dimensions | 130 mm x 96 mm x 28.5 mm |
| Door Station Protection | IK07; IP65 |
| Door Station Operating Temperature | -30°C to +60°C |
| Installation | Flush or surface mount |
| Indoor Monitor Model | DHI-VTH2621GW-P |
| Indoor Monitor Screen | 7" TFT capacitive touchscreen, 1024 x 600 |
| Indoor Monitor Processor | Dual core 1.2 GHz, 128 MB ROM, 128 MB RAM |
| Indoor Monitor Ports | 6 alarm in; 1 alarm out; 1 power out (12 V, 200 mA); doorbell via any alarm input; 10/100 Mbps Ethernet |
| Indoor Monitor Power | 12 VDC 1 A or standard PoE (36 to 57 V, 0.35 A) |
| Indoor Monitor Power Consumption | Standby ≤2 W, working ≤6 W |
| Indoor Monitor Dimensions | 189.0 mm x 130.0 mm x 26.9 mm |
| Extensions | Villa: 9; apartment: 4 |
| Included Switch | DH-PFS3005-4ET-36E: 4 x RJ-45 10/100 M PoE ports, 1 x RJ-45 uplink, 100 to 240 VAC, DIN rail mountable |
| Certifications | CE; FCC; UL |
| Warranty | 3 years |
Similar products
Questions and answers
No questions about this product yet. Ask ours first, and a licensed installer will answer.
Get a quote for this product
Prefer the full form?
Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.
The full quote form opens as you scroll here.
Frequently Asked Questions
Normally no. The kit includes the door station, the indoor screen and the PoE switch that powers both, which is the part usually sold separately. You may still need a door strike or gate lock if you want remote release, and cabling.
This is an IP kit, so it runs over standard network cable and is powered by the included PoE switch. The 2-wire kit runs over a simple two-core cable, which suits replacing an old intercom where there is no network cabling. If new cable can be run, IP is the more flexible choice.
Yes. It supports both flush mounting for a tidy built-in look and surface mounting where cutting into a wall or pillar is not practical.
Up to 9 extension monitors in a house setup, so you can put screens at the front door, in the kitchen and upstairs, with calls ringing on all of them.
Yes. Through the app you can see the camera, talk to the visitor and release the door from anywhere with an internet connection.
A Complete Intercom, Switch Included
The Dahua DHI-KTP01L-AUS includes the door station, 7 inch touchscreen and the PoE switch that powers them, so there is nothing else to buy to get a video intercom working.
