Bosch CM751B Solution Conettix IP Ethernet Module | Melbourne
The Bosch CM751B connects Solution 16i or 144 control panels to an IP network for supervised alarm reporting and remote upload/download. Features 128‑bit AES encryption, low bandwidth consumption, and supports dynamic/fixed IP addresses. Replaces PSTN with high‑security IP communication – ideal for commercial and residential installations.
$185.00 +GST
Bosch CM751B IP module – includes HW750 riser kit. 3‑year warranty.
In stock
128‑bit AES Encryption
End‑to‑end encryption ensures secure alarm transmission.
IP Reporting & Remote Upload
Conettix and CSV‑IP formats; remote programming via LAN/WAN.
Low Bandwidth
Efficient polling and transmission – minimal impact on network.
Simple Installation
Plugs directly onto panel header; HW750 riser included.
Melbourne installs: Ideal for upgrading Bosch Solution panels to fast, secure IP communication. We supply, install, and configure.
Keywords:
Bosch CM751B
· IP module · Conettix · 128‑bit encryption · Solution 16i/144 · Melbourne
Technical Specifications
Quick Specs
Network
10/100 Base‑T Ethernet (RJ45); protocols: TCP/IP, UDP, DHCP, HTTP, SMTP, etc.
Encryption
128‑bit AES Rijndael
Power
Supplied by panel; derate accessory power by 60 mA when fitted.
Dimensions
93 × 52 × 30 mm (W×D×H)
Environmental
0°C to 55°C; humidity 5‑85% non‑condensing
Compatibility
Solution 16i / 144 panels; mounts on expansion header
Reporting Formats
Conettix, CSV‑IP, MyAlarm, CID, RP, etc.
Included
Module, HW750 riser kit, installation guide
Order number: CM751B. RCM, CE, UL listed. 3‑year warranty.
Why Choose This Bosch IP Module
Secure & fast
1
High security
128‑bit AES encryption and constant network supervision protect against tampering.
2
Cost‑effective
Use existing IP network – no ongoing PSTN call costs; low bandwidth consumption.
3
Fast remote access
Remote upload/download and alarm reporting at network speed.
4
Easy installation
Plugs directly onto panel; HW750 riser allows co‑installation with voice module.
Simple Installation Process
Step‑by‑step
1
Power down panel
Disconnect AC and battery before installation.
2
Mount module
Plug CM751B onto panel expansion header; use HW750 riser if needed. Secure with standoffs.
3
Connect Ethernet
Plug RJ45 cable into LAN; restore power.
4
Configure IP & reporting
Use panel programming or remote software to set IP address, reporting paths, encryption.
Tip: LEDs indicate network link and activity – use them for troubleshooting.
Request Your Free Quote / Installation
Fast response
Tell us about your Bosch panel model and IP reporting requirements. We’ll provide a clear quote and scope for Melbourne metro areas.
Frequently Asked Questions
10 FAQs
Bosch Solution 16i and Solution 144 control panels.
Yes, it supports dynamic (DHCP) and fixed IP addresses.
128‑bit AES Rijndael encryption for high‑security applications.
Yes, the included HW750 riser kit allows the CM751B and CM101B voice module to be installed together.
Conettix, CSV‑IP, MyAlarm, CID, and more.
Yes, it can be used as a primary path, with PSTN as backup if desired.
It is powered directly from the control panel via the expansion header. Derate accessory power by 60 mA.
LAN link, activity, and status – simplifies setup and troubleshooting.
No, it is intended for indoor mounting inside the control panel enclosure.
3 years back to base.
Price Check Snapshot
Market reference
The Bosch CM751B IP Module is priced at $185.00 + GST. Bulk discounts may apply. Contact us with your quantity – we’ll confirm availability and any applicable discounts. If you have a like‑for‑like quote from another supplier, we’ll do our best to match it.