Akuvox E18C 7‑Inch Face Recognition Access Control & SIP Intercom | Melbourne
A commercial‑grade 7‑inch touchscreen access control terminal that combines SIP intercom with AI face recognition for fast, secure entry in Melbourne apartment lobbies, offices, warehouses and community facilities.
With liveness detection, multi‑factor access (Face, PIN, Card, BLE & QR), and 802.3af PoE, the E18C helps you standardise entry, reduce tailgating, and simplify visitor and staff access management.
$1,309 +GST
+3 Year Warranty & Support
Commercial spec reference
Face recognition with liveness
Fast identification (typically <200ms) with liveness detection to reduce spoofing.
Multi‑way access
Face, PIN, RFID/NFC card, BLE mobile unlock and QR code support.
7‑inch IPS touchscreen
1024×600 display for on‑screen directory prompts and PIN entry.
SIP + ONVIF integration
Intercom calling over SIP and video integration via ONVIF for compatible systems.
Melbourne installs: E18C is a strong choice where you need both intercom calling and access control in one unit.
We can configure face + PIN + card policies, wire the 2 relay outputs to electric strikes or mag locks, and integrate to third‑party access controllers via Wiegand or RS485.
Keywords:
Akuvox E18C
· face recognition access control · 7 inch touchscreen intercom · SIP video intercom Melbourne
Technical Specifications
Quick Specs
Display
7" IPS LCD touchscreen (1024×600).
Cameras
2MP camera with WDR. Wide‑angle approx. 62° (H) / 36° (V).
Connectivity
RJ45 Ethernet (10/100Mbps). BLE supported for mobile access.
Power
IEEE 802.3af PoE or 12V DC (if not using PoE).
Outdoor rating
IP65 rated for outdoor use with correct mounting and sealing.
Relays & I/O
2 relay outputs, 3 inputs, 1×RS485 port, 2×Wiegand. TF card slot. Tamper alarm.
Access methods
Face, PIN, QR code, BLE, and RF card (13.56MHz, 125kHz & NFC).
Operating temp
Working: −20°C to +55°C. Humidity: 10–90% non‑condensing.
In Melbourne projects, we deploy E18C for secure lobbies and staff entrances where face recognition plus SIP intercom reduces friction while improving control.
Why Choose Akuvox E18C in Melbourne
Built for real entries
1
Faster visitor handling
Answer intercom calls from compatible endpoints and release doors remotely while keeping a clear audit trail.
2
Stronger identity checks
Face recognition with liveness plus PIN/card options supports layered access policies.
3
Built for throughput
Large capacity (up to 20,000 faces and 20,000 cards) suits busy sites and multi‑tenant entries.
4
Integrates cleanly
SIP + ONVIF plus Wiegand/RS485 interfaces help connect to VoIP and access control ecosystems.
Our Seamless Installation Process
Step-by-step
1
Site check
Confirm mounting position, power route, and confirm the best mounting (surface/flush), cabling path, and power (PoE/12V) for your site.
2
Mount + wiring
Install the chosen mount (surface or flush), connect PoE (802.3af) or 12V DC, and complete proper sealing for outdoor installs.
3
System setup
SIP accounts, directory, unlock rules, relays, schedules and access credentials.
4
Handover
Testing, user training, and a clean handover so your entry works from day one.
Tip: If you’re mounting on a metal gate post or exposed surface, we’ll recommend rain cover and correct sealing to keep the IP65 rating effective.
Request Your Free Installation Quote
Fast response
Share your site type (lobby / office / warehouse), preferred access methods (face, PIN, card, BLE, QR), and whether you need flush or wall mounting. We will respond with a clear scope and installation quote.
Frequently Asked Questions
10 FAQs
Yes. E18C is designed for commercial and community applications where you want intercom plus secure access control at the same entry point.
It supports Face, PIN, RF card (13.56MHz, 125kHz & NFC), BLE mobile unlock, and QR code access.
Typical identification speed is under 200ms. It supports large databases such as up to 20,000 faces and 20,000 cards, with event logs up to 50,000 records.
Yes. E18C complies with SIP for intercom calling and ONVIF for compatible video integrations.
It has a 7-inch IPS LCD touchscreen (1024×600) and a 2MP WDR camera with a wide viewing angle.
It is rated IP65. For long-term outdoor reliability, correct mounting and sealing are important, especially on exposed surfaces.
Yes. It provides two relay outputs that can be wired to common door hardware. We confirm lock type and safe wiring during the site check.
Yes. It includes Wiegand (2) and an RS485 port, which helps connect to third-party access control components depending on your design.
Mask detection is supported. Body temperature detection is available only on E18C(MD02) variants.
Mounting (flush or wall), PoE/12V power and network setup, relay wiring to locks, user enrollment (faces/cards/PIN), and integration testing with your SIP and access control environment.
Price Check Snapshot
Market reference
Pricing for Akuvox E18C can vary by variant (standard vs. MD02), mounting type (flush/wall), and access configuration. Share your requirements and we will quote a like‑for‑like supply + installation price for Melbourne projects.
