Akuvox E18C 7-Inch Linux Touchscreen Video Door Phone
The Akuvox E18C is a budget-friendly, commercial-grade access control and intercom device with a 7-inch IPS touchscreen, 2MP WDR camera, and Linux OS. Featuring advanced dual-camera liveness detection and AI-powered face recognition, it prevents unauthorized access via photos or spoofing attempts. Optional body temperature and mask detection capabilities provide additional health monitoring. Dual-frequency RFID/NFC card reading, full-duplex two-way audio with echo cancellation, 2 relay outputs, and IP65 weatherproofing make it ideal for building access control. PoE powered for simple installation.
Key Specifications
Core Features
Technical Specifications
| Category | Specification |
|---|---|
| Model | Akuvox E18C |
| Display | 7-inch IPS LCD capacitive touchscreen, 1024x600 resolution |
| Camera | 2MP CMOS with Wide Dynamic Range (WDR), 62H x 36V viewing angle |
| Face Recognition | AI-powered with dual-camera liveness detection, capacity for 20,000 faces, recognition speed less than 200ms |
| Temperature Detection | Optional (E18C MD02 variant): 0.3M-1M range, 0.1C accuracy, ±0.3C deviation, 34C-45C range |
| Mask Detection | AI-powered algorithm for workplace safety protocols |
| Audio Features | 2-way full-duplex audio with echo cancellation, H.264 video & G.722 audio codec |
| Card Reader | Dual-frequency: 13.56MHz and 125kHz RFID, NFC support |
| Access Capacity | 20,000 face records, 20,000 card records, 50,000 event logs |
| Access Methods | Face, RFID card, NFC, PIN, Bluetooth, QR code (6+ methods) |
| Relay Outputs | 2 independent relay outputs for door locks or automation |
| Digital Inputs | 3 digital inputs for sensors and buttons |
| Communication Protocols | SIP (RFC 2543, RFC 3261), ONVIF, Wiegand, RS485 support |
| Power Supply | PoE (IEEE 802.3af) or DC 12V external adapter |
| Ethernet Port | RJ45, 10/100 Mbps |
| Storage | TF card slot for local recording |
| IP Rating | IP65 (dust-tight, protected against water jets) |
| Installation | Surface mount and flush mount supported |
| Dimensions | 275mm (H) x 120mm (W) x 34.6mm (D) |
| Material | Black plastic housing |
| Operating System | Linux OS |
| Working Temperature | -20C to +55C |
| Working Humidity | 10% to 90% (non-condensing) |
| Typical Applications | Commercial buildings, apartments, offices, community access control |
| Price (AUD) | $1,350.00 RRP |
Similar products
Questions and answers
No questions about this product yet. Ask ours first, and a licensed installer will answer.
Get a quote for this product
Prefer the full form?
Tell us about the property and we will plan the cabling, power and recording with you. Mention the product above.
The full quote form opens as you scroll here.
Frequently Asked Questions
Dual-camera liveness detection uses advanced deep learning to determine whether a face is real or a spoofing attempt (photo, video, or mask). This prevents unauthorized access through photo-based attacks. The system verifies genuine facial movement and features.
The E18C can store up to 20,000 face records and 20,000 card records, with capacity for 50,000 event logs. This is more than sufficient for most commercial buildings and residential facilities.
The E18C standard version includes face recognition, access control, and basic features. The E18C MD02 version adds optional temperature detection and mask detection capabilities, ideal for facilities with enhanced health screening requirements.
The temperature detection is accurate to within 0.1C with a deviation of ±0.3C. It works at distances from 0.3M to 1M and can measure temperatures in the range of 34C to 45C. It's suitable for facility health protocols but not for medical diagnosis.
Yes. The E18C supports SIP, ONVIF, Wiegand, and RS485, allowing it to integrate with existing building management systems, intercoms, and access control infrastructure. 2 relay outputs enable direct control of door locks or gates.
The E18C supports dual-frequency RFID: 13.56MHz and 125kHz, plus NFC. This ensures compatibility with almost any existing card access system or new credentials your facility uses.
Face recognition on the E18C is very fast, with identification speed less than 200 milliseconds. This means residents get quick, hands-free access without delays.
Yes. The E18C is designed for PoE (IEEE 802.3af) power, meaning it draws just enough current to operate from a standard network switch. This simplifies installation and eliminates separate power supplies. A DC 12V external adapter is also available as an alternative.
Absolutely. The E18C is rated IP65, meaning it's fully dust-tight and protected against high-pressure water jets. It performs reliably in Melbourne's coastal, urban, and harsh weather conditions.
Smart Access Control for Melbourne Commercial Buildings
Sipko Security specializes in commercial-grade Akuvox access control system installation for buildings, offices, and facilities across Melbourne. Contact us for competitive pricing and expert installation.
